| Number of inputs and outputs |
Number of digital outputs: 2 |
| Measuring range |
| -1...1 bar | -1000...1000 mbar | -14.5...14.5 psi | -100...100 kPa | -0.1...0.1 MPa |
|
| Process connection |
threaded connection G 1/8 external thread DIN EN ISO 1179-2 Internal thread:M5 |
| Measuring element |
metallic thin film cell |
| Application |
for industrial applications |
| Media |
liquids and gases |
| Medium temperature |
-40...90 |
| Min. bursting pressure |
|
| Pressure rating |
|
| Note on pressure rating |
|
| Vacuum resistance |
|
| Type of pressure |
relative pressure; vacuum |
| Operating voltage |
18...30 DC |
| Current consumption |
< 15 |
| Min. insulation resistance |
100; (500 V DC) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Power-on delay time |
< 60 |
| Number of inputs and outputs |
Number of digital outputs: 2 |
| Total number of outputs |
2 |
| Output signal |
switching signal; IO-Link; (configurable) |
| Electrical design |
PNP/NPN |
| Number of digital outputs |
2 |
| Output function |
normally open / closed; (configurable) |
| Max. voltage drop switching output DC |
2 |
| Permanent current rating of switching output DC |
100 |
| Switching frequency DC |
< 170 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
yes (non-latching) |
| Overload protection |
yes |
| Measuring range |
| -1...1 bar | -1000...1000 mbar | -14.5...14.5 psi | -100...100 kPa | -0.1...0.1 MPa |
|
| Set point SP |
| -0.98...1 bar | -980...1000 mbar | -14.2...14.5 psi | -98...100 kPa | -0.098...0.1 MPa |
|
| Reset point rP |
| -0.99...0.99 bar | -990...990 mbar | -14.4...14.4 psi | -99...99 kPa | -0.099...0.099 MPa |
|
| In steps of |
| 0.001 bar | 1 mbar | 0.1 psi | 0.1 kPa | 0.0001 MPa |
|
| Factory setting |
| SP1 = -500 mbar | rP1 = -540 mbar | ou1 = Hno; | | SP2 = 500 mbar | rP2 = 460 mbar | ou2 = Hno; | | dS1/dS2 = 0 ms | dr1/dr2 = 0 ms | | | coF = 0 % | P-n = PnP | dAP= 60 ms |
|
| Switch point accuracy |
< ± 1,5 (nach DIN EN 61298-2) |
| Repeatability |
< ± 0,15; (with temperature fluctuations < 10 K) |
| Characteristics deviation |
< ± 1,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1) |
| Linearity deviation |
< ± 0,2 (BFSL) / < ± 0,4 (LS) |
| Zero-point stabilization |
| IO-Link, | 0; (see operating instructions zero-point behavior) | | Switching output | 0,75 |
|
| Hysteresis deviation |
< ± 0,4 |
| Long-term stability |
< ± 0,2; (per 6 months) |
| Temperature coefficient zero point |
< 0,3 (-25...90 °C) |
| Temperature coefficient span |
< 0,2 (-25...90 °C) |
| Response time |
< 3 |
| Parameter setting options |
hysteresis / window; normally open / closed; switching logic; switch-on/switch-off delay; Damping |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| Profiles |
Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
| SIO mode |
yes |
| Required master port class |
A |
| Process data analog |
2 |
| Process data binary |
2 |
| Min. process cycle time |
5 |
| Supported DeviceIDs |
| Type of operation | DeviceID |
|---|
| default | 1830 |
|
| Ambient temperature |
-40...90 |
| Storage temperature |
-40...100 |
| Protection |
IP 67; IP 69K |
| EMC |
|
| Shock resistance |
| DIN EN 60068-2-27 | 500 g (1 ms) |
|
| Vibration resistance |
| DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
|
| MTTF |
667 |
| UL approval |
| UL approval number | J015 | | File number UL | E174189 |
|
| Pressure equipment directive |
sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
| Weight |
54.3 |
| Housing |
tubular |
| Dimensions |
Ø 19 / L = 66 |
| Material |
Process connection , measuring cell: stainless steel (630/1.4542/17-4 PH); M12-plug: stainless steel (1.4404 / 316L); M12-plug: acrylate, PEI; ventilation diaphragm: PTFE |
| Materials (wetted parts) |
Process connection , measuring cell: stainless steel (630/1.4542/17-4 PH); sealing: FKM |
| Min. pressure cycles |
60 million; (at 1.2 times nominal pressure) |
| Tightening torque |
20...25; (recommended tightening torque; Depends on lubrication, seal and pressure rating) |
| Process connection |
threaded connection G 1/8 external thread DIN EN ISO 1179-2 Internal thread:M5 |
| Process connection sealing |
FKM (DIN EN ISO 1179-2) |
| Restrictor element integrated |
no |
| Remarks |
| BFSL = Best Fit Straight Line | | LS = limit value setting |
|
| Pack quantity |
1 pcs. |
| Connection |
Connector: 1 x M12; coding: A |
