| Design |
housing for DIN rail mounting |
| Application |
I/O modules for use in the control cabinet |
| Operating voltage |
20...30 DC; (US ; to SELV/PELV) |
| Current consumption |
300...3900; (US) |
| Protection class |
III |
| Max. current load total |
3.6 |
| Total number of inputs and outputs |
16; (configurable) |
| Number of inputs and outputs |
Number of digital inputs: 8; Number of digital outputs: 8 |
| Number of digital inputs |
8; (IO-Link Port Class A) |
| Switching level high |
11...30 |
| Switching level low |
0...5 |
| Digital inputs protected against short circuits |
yes |
| Number of digital outputs |
8; (IO-Link Port Class A) |
| Max. current load per output |
300 |
| Short-circuit proof |
yes |
| Communication interface |
Ethernet; IO-Link |
| Transmission standard |
10Base-T; 100Base-TX |
| Transmission rate |
10 MBit/s; 100 MBit/s |
| Protocol |
EtherNet/IP |
| Factory settings |
| IP address: 192.168.1.250 | | subnet mask: 255.255.255.255 | | gateway IP address: 0.0.0.0 | | MAC address: see type label |
|
| Note on interfaces |
| DHCP, BOOTP, static | | DLR (Device Level Ring) | | Supported network topologies: line | | ring |
|
| Transmission standard |
10Base-T; 100Base-TX |
| Transmission rate |
10 MBit/s; 100 MBit/s |
| Protocol |
MQTT JSON |
| Factory settings |
| IP address: 169.254.x.x | | subnet mask: 255.255.0.0 | | gateway IP address: 0.0.0.0 | | MAC address: see type label |
|
| Note on interfaces |
|
| Transmission type |
COM1 (4,8 kBaud); COM2 (38,4 kBaud); COM3 (230,4 kBaud) |
| IO-Link revision |
1.1 |
| Number of ports class A |
8 |
| Ambient temperature |
-25...65 |
| Storage temperature |
-25...85 |
| Max. relative air humidity |
90 |
| Protection |
IP 20 |
| EMC |
|
| MTTF |
44 |
| Weight |
318 |
| Housing |
rectangular |
| Type of mounting |
Mounting on DIN rail; (TH35 (EN 60715)) |
| Dimensions |
125.7 x 50 x 105.3 |
| Material |
housing: PA orange |
| Items supplied |
|
| Remarks |
| Further information is available in the manual. |
|
| Pack quantity |
1 pcs. |
