| Frequency range |
2...5600 |
| Measuring principle |
capacitive |
| Design |
DataScience condition monitoring |
| Application |
industrial machines |
| Operating voltage |
18...30 DC |
| Current consumption |
< 50 |
| Min. insulation resistance |
100; (500 V DC) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Type of sensor |
Microelectromechanical system (MEMS) |
| Number of inputs and outputs |
Number of digital outputs: 2 |
| Output signal |
switching signal; IO-Link |
| Electrical design |
PNP/NPN; (configurable) |
| Number of digital outputs |
2 |
| Output function |
normally open / closed |
| Max. voltage drop switching output DC |
2 |
| Max. current load per output |
100 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
yes (non-latching) |
| Overload protection |
yes |
| Note on setpoint SP |
|
| Frequency range |
2...5600 |
| Measuring principle |
capacitive |
| Number of measurement axes |
3 |
| Measuring range of vibration |
0...0.3 |
| Resolution |
0.0001 |
| Set point SP |
0.0002...0.3 |
| Reset point rP |
0...0.2998 |
| Measuring range of vibration |
0...156.91 |
| Resolution |
0.01 |
| Set point SP |
2...156.91 |
| Reset point rP |
0...154.91 |
| Measuring range |
-30...80 |
| Resolution |
0.1 |
| Set point SP |
-28...80 |
| Reset point rP |
-30...78 |
| Accuracy |
± 5 |
| Linearity deviation |
2; (% of the final value) |
| Accuracy |
2-4000Hz +/- 10%, 4000..5600Hz -3dB |
| Accuracy |
2-5000Hz +/- 10%, 5000...5600Hz -3dB |
| Accuracy |
2-5000Hz +/- 10%, 5000...5600Hz -3dB |
| Parameter setting options |
IO-Link |
| Diagnostic functions |
self-test |
| Communication interface |
IO-Link |
| Transmission type |
COM3 (230,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9: 2013-07 |
| Profiles |
| BLOB | Binary Large Object transfer | | Common - I&D | Identification and Diagnosis | | Function | Locator | | Function | ProductURI |
|
| SIO mode |
yes |
| Required master port class |
A |
| Min. process cycle time |
4.1 |
| IO-Link process data (cyclical) |
| Function | bit length |
|---|
| v-RMS (x) | 16 | | v-RMS (y) | 16 | | v-RMS (z) | 16 | | v-RMS (Magnitude) | 16 | | scaling / v-RMS | 8 | | a-Peak (x) | 16 | | a-Peak (y) | 16 | | a-Peak (z) | 16 | | a-Peak ( Magnitude) | 16 | | a-RMS (x) | 16 | | a-RMS (y) | 16 | | a-RMS (z) | 16 | | a-RMS ( Magnitude) | 16 | | scaling / a-Peak/a-RMS | 8 | | temperature | 16 | | scaling / temperature | 8 | | device status | 4 | | unbalance / bearing event | 1 | | virtual switching output (v-ou1) | 1 | | binary switching information | 2 |
|
| IO-Link functions (acyclical) |
filter for v-RMS, a-RMS, a-Peak; Hysteresis; window; Switch points; switching logic; unbalance measurement; machine operating hours counter; bearing analysis (BearingScout) |
| Supported DeviceIDs |
| Type of operation | DeviceID |
|---|
| default | 1778 |
|
| Note |
| For further information please see the IODD PDF file at "Downloads" |
|
| Ambient temperature |
-30...80 |
| Storage temperature |
-30...80 |
| Protection |
IP 67; IP 68; IP 69 |
| EMC |
| EN IEC 61000-6-2 | noise immunity / industrial environments | | EN IEC 61000-6-3 | noise emission in domestic areas |
|
| Shock resistance |
| DIN EN 60068-2-27 | 50 g 11 ms | | 500 g 1 ms |
|
| Vibration resistance |
| DIN EN 60068-2-6 | 20 g / 10...3000 Hz |
|
| MTTF |
480 |
| UL approval |
| UL approval number | L006 | | File number UL | E251902 |
|
| Standard |
mechanical vibration; ISO 10816-3; ISO 2954; ISO 20816-3 |
| Weight |
98.4 |
| Type of mounting |
mounting screw |
| Material |
housing: stainless steel (1.4404 / 316L) |
| Tightening torque |
4.6 |
| Display |
| Power | 1 LED, green | | fault | 1 LED, red |
|
| Items supplied |
| mounting screw: 1 x (M5 x 25 mm) |
|
| Pack quantity |
1 pcs. |
|
Connector: 1 x M12; coding: A; Maximum cable length: 20 m |
