| Type of light |
red light |
| Laser protection class |
1 |
| Housing |
rectangular |
| System |
polarization filter |
| Function principle |
Retro-reflective sensor |
| Operating voltage |
10...30 DC |
| Current consumption |
< 15 |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Type of light |
red light |
| Wave length |
650 |
| Typ. lifetime |
50000 |
| Electrical design |
NPN |
| Output function |
light-on/dark-on mode; (programmable) |
| Max. voltage drop switching output DC |
2.5 |
| Permanent current rating of switching output DC |
200 |
| Switching frequency DC |
2000 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
yes (non-latching) |
| Overload protection |
yes |
| Range referred to prismatic reflector |
8; (Prismatic reflector 50 x 50 mm E20722) |
| Range adjustable |
yes |
| Diameter of the smallest detectable object |
2.5; (0,1 m; 2,5 m: 4; 5 m: 8) |
| Max. light spot diameter |
12 |
| Light spot dimensions refer to |
at maximum range |
| Polarization filter available |
yes |
| Ambient temperature |
-10...60 |
| Protection |
IP 67 |
| EMC |
|
| Laser protection class |
1 |
| Notes on laser protection |
| Caution: | Laser light | | laser class: | 1 | | EN / IEC60825-1:2007 | | EN / IEC60825-1:2014 | | Complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 8, 2019. |
|
| MTTF |
725 |
| Weight |
28.9 |
| Housing |
rectangular |
| Dimensions |
35 x 11 x 24 |
| Material |
housing: ABS; fixture: diecast zinc; LED window: SEPS; pushbutton: SEPS |
| Lens material |
|
| Lens alignment |
Side sensing |
| Display |
| Switching status | 1 x LED, yellow | | Power | 1 x LED, green | | Function | 1 x LED, red |
|
| Electronic lock |
yes |
| Items supplied |
| screws: 2 x (M3 x 16 mm) | | Basic clip: 1, E20964 | | spring washers: 2 | | Nuts: 2 |
|
| Remarks |
| cULus - Class 2 source required |
|
| Pack quantity |
1 pcs. |
| Connection |
Connector: 1 x M8; coding: A |
