| Type of light |
red light |
| Laser protection class |
1 |
| Housing |
rectangular |
| Operating voltage |
18...30 DC; (cULus - Class 2 source required) |
| Current consumption |
< 30 |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Power-on delay time |
< 0.3 |
| Type of light |
red light |
| Wave length |
630 |
| Typ. lifetime |
50000 |
| Number of inputs and outputs |
Number of digital inputs: 1; Number of digital outputs: 1; Number of analog outputs: 1 |
| Inputs |
Laser On/ Off |
| Number of digital inputs |
1 |
| Total number of outputs |
2 |
| Electrical design |
PNP/NPN; (configurable) |
| Number of digital outputs |
1 |
| Output function |
normally open / closed; (configurable) |
| Max. voltage drop switching output DC |
2.2 |
| Permanent current rating of switching output DC |
100 |
| Switching frequency DC |
200 |
| Notes on switching frequency |
|
| Number of analog outputs |
1 |
| Analog current output |
4...20; (IEC61131-2) |
| Max. load |
500 |
| Analog voltage output |
0...10; (IEC 61131-2) |
| Min. load resistance |
5000 |
| Short-circuit protection |
yes |
| Overload protection |
yes |
| Range adjustable |
yes |
| Max. light spot diameter |
0.5 |
| Light spot dimensions refer to |
at maximum range |
| Measuring range |
0.03...0.08; (6...90% remission) |
| Temperature compensation |
yes |
| Repeatability |
0.03 |
| Linearity error of analog output |
±0,1 |
| Resolution |
0,01 |
| Notes on the accuracy / deviation |
The indicated values are reached after a warm-up time of 20 minutes. |
| Parameter setting options |
hysteresis / window / 2-point; Switch-on and switch-off delay; switch-on operations; Teach function; filter; light-on/dark-on mode; laser switch-off; Type of operation |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| Profiles |
| Smart Sensor - SSP 4.1.1 | Measuring and Switching Sensor, 1 channel | | Common - I&D | Identification and Diagnosis | | Extension | Sensor control | | Extension | Teach two point | | Function | Locator | | Function | ProductURI |
|
| SIO mode |
yes |
| Required master port class |
A |
| Min. process cycle time |
3.2 |
| IO-Link process data (cyclical) |
| Function | bit length |
|---|
| process value | 16 | | device status | 4 | | binary switching information | 2 |
|
| IO-Link functions (acyclical) |
application specific tag; operating hours counter |
| Supported DeviceIDs |
| Type of operation | DeviceID |
|---|
| default | 1606 |
|
| Note |
| For further information please see the IODD PDF file at "Downloads" |
|
| Ambient temperature |
0...60 |
| Storage temperature |
-10...65 |
| Protection |
IP 65; IP 67 |
| EMC |
| EN 61000-4-2 ESD | 4 kV CD / plastics | | 8 kV AD / metal | | EN 61000-4-3 HF radiated | 10 V/m | | EN 61000-4-6 HF conducted | 10 V | | EN 61000-4-4 Burst | 2 kV | | EN 55011 | class B |
|
| Vibration resistance |
| EN 60068-2-6 Fc | (10-55) Hz 1 mm amplitude, vibration duration 5 min., 30 min. per axis with resonance or 55 Hz |
|
| Shock resistance |
| EN 60068-2-27 Ea | 30 g 11 ms half-sine; 3 shocks each in every direction of the 3 coordinate axes |
|
| Laser protection class |
1 |
| Notes on laser protection |
| Caution: | Laser light | | laser class: | 1 | | EN/IEC 60825-1 2007 | | EN/IEC 60825-1 2014 | | Complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 8, 2019. |
|
| MTTF |
552 |
| UL approval |
|
| Weight |
127.2 |
| Housing |
rectangular |
| Dimensions |
51 x 51 x 17 |
| Material |
housing: diecast zinc; front lens: plastics |
| Tightening torque |
5 |
| Display |
| Switching status | 1 LED, yellow | | supply voltage | 1 LED, green | | Operating mode | 4 LED, white |
|
| Teach function |
yes |
| Pack quantity |
1 pcs. |
| Connection |
Connector: 1 x M12; coding: A |
