| Type of light |
red light |
| Housing |
rectangular |
| System |
polarization filter |
| Function principle |
Retro-reflective sensor |
| Operating voltage |
10...30 DC |
| Current consumption |
12; ((24 V)) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Type of light |
red light |
| Wave length |
633 |
| Electrical design |
PNP |
| Output function |
light-on/dark-on mode; (selectable) |
| Max. voltage drop switching output DC |
2.5 |
| Permanent current rating of switching output DC |
100 |
| Switching frequency DC |
1000 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
yes (non-latching) |
| Range referred to prismatic reflector |
0.05...5; (Prismatic reflector Ø 80 E20005) |
| Range adjustable |
yes |
| Max. light spot diameter |
150 |
| Light spot dimensions refer to |
at maximum range |
| Polarization filter available |
yes |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| Profiles |
| Smart Sensor - SSP 0 | Generic Profiled Sensor | | Function | Device identification | | Function | Multiple switching signal |
|
| SIO mode |
yes |
| Required master port class |
A |
| Min. process cycle time |
2.5 |
| IO-Link process data (cyclical) |
| Function | bit length |
|---|
| process value | 8 | | binary switching information | 1 |
|
| IO-Link functions (acyclical) |
application specific tag; operating hours counter; switching cycles counter |
| Supported DeviceIDs |
| Type of operation | DeviceID |
|---|
| default | 422 |
|
| Ambient temperature |
-25...80 |
| Protection |
IP 65; IP 67; IP 68; IP 69K |
| EMC |
|
| MTTF |
681 |
| UL approval |
| Ta | -25...40 °C | | Enclosure type | Type 1 | | voltage supply | Class 2 | | UL approval number | E010 |
|
| Weight |
34.4 |
| Housing |
rectangular |
| Dimensions |
41.3 x 13 x 21 |
| Material |
housing: stainless steel (1.4404 / 316L); plastics: PPSU; sealing: EPDM |
| Lens material |
|
| Lens alignment |
Side sensing |
| Tightening torque |
1; (screws) |
| Display |
| Switching status | 1 x LED, yellow | | Power | 1 x LED, green |
|
| Remarks |
| cULus - Class 2 source required |
|
| Pack quantity |
1 pcs. |
| Connection |
Connector: 1 x M8; coding: A |
