| Type of light |
red light |
| Laser protection class |
1 |
| Housing |
rectangular |
| Function principle |
Diffuse reflection sensor |
| Operating voltage |
10...30 DC |
| Current consumption |
16; (24 V) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Type of light |
red light |
| Wave length |
650 |
| Electrical design |
NPN |
| Output function |
light-on/dark-on mode; (selectable) |
| Max. voltage drop switching output DC |
2.5 |
| Permanent current rating of switching output DC |
100 |
| Switching frequency DC |
1000 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
yes (non-latching) |
| Range |
1...100; (white paper 200 x 200 mm) |
| Range on white object (90 % remission) |
1...100 |
| Range on grey object (18 % remission) |
8...100 |
| Range on black object (6 % remission) |
12...100 |
| Range adjustable |
yes |
| Max. light spot diameter |
2 |
| Light spot dimensions refer to |
at maximum range |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| Profiles |
| Smart Sensor - SSP 0 | Generic Profiled Sensor | | Function | Device identification | | Function | Multiple switching signal | | Function | Process data variable | | Function | Device diagnosis | | Function | Teach channel |
|
| SIO mode |
yes |
| Required master port class |
A |
| Min. process cycle time |
10 |
| IO-Link process data (cyclical) |
| Function | bit length |
|---|
| process value | 32 | | device status | 4 | | binary switching information | 1 |
|
| IO-Link functions (acyclical) |
application specific tag; operating hours counter; switch-on cycle counter |
| Supported DeviceIDs |
| Type of operation | DeviceID |
|---|
| default | 526 |
|
| Ambient temperature |
-10...60 |
| Protection |
IP 65; IP 67 |
| EMC |
|
| Laser protection class |
1 |
| Notes on laser protection |
| Caution: | Laser light | | laser class: | 1 | | EN / IEC60825-1:2007 | | EN / IEC60825-1:2014 | | Complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 8, 2019. |
|
| MTTF |
513 |
| UL approval |
| Ta | -25...60 °C | | Enclosure type | Type 1 | | voltage supply | Class 2 |
|
| Weight |
60.1 |
| Housing |
rectangular |
| Dimensions |
35.4 x 13 x 21 |
| Material |
housing: ABS; PPSU; sealing: EPDM |
| Lens material |
|
| Lens alignment |
Side sensing |
| Tightening torque |
0.5; (screws) |
| Display |
| Switching status | 1 x LED, yellow | | Power | 1 x LED, green |
|
| Remarks |
| cULus - Class 2 source required |
|
| Pack quantity |
1 pcs. |
| Connection |
Cable: 2 m, PUR, black, Ø 3.7 mm; 3 x 0.25 mm² |
