| Number of inputs and outputs |
Number of digital outputs: 2 |
| Factory setting |
oils; oil-based media; powder |
| Process connection |
threaded connection G 1/2 sealing cone |
| System |
gold-plated contacts |
| Media |
Liquids; viscous media; powder |
| Cannot be used for |
See the operating instructions, chapter "Function and features". |
| Medium temperature |
-20...85 |
| Probe length |
253 |
| Tank pressure |
|
| Operating voltage |
18...30 DC |
| Current consumption |
< 50 |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Measuring principle |
capacitive |
| Number of inputs and outputs |
Number of digital outputs: 2 |
| Total number of outputs |
2 |
| Output signal |
switching signal; IO-Link |
| Electrical design |
PNP/NPN |
| Number of digital outputs |
2 |
| Output function |
normally open / closed; (configurable) |
| Max. voltage drop switching output DC |
2.5 |
| Permanent current rating of switching output DC |
100 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
yes (non-latching) |
| Overload protection |
yes |
| Factory setting |
oils; oil-based media; powder |
| Response time |
< 0.5 |
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| SIO mode |
yes |
| Required master port class |
A |
| Process data analog |
1 |
| Process data binary |
2 |
| Min. process cycle time |
2.3 |
| Supported DeviceIDs |
| Type of operation | DeviceID |
|---|
| default | 642 |
|
| Ambient temperature |
-20...60 |
| Storage temperature |
-40...85 |
| Protection |
IP 67; (when used outside the hazardous area: IP 68 / IP 69) |
| ATEX marking |
II 3D Ex tc IIIC T90°C Dc X |
|
II 3G Ex nA IIC T4 Gc X |
| EMC |
| DIN EN 61000-6-2 | | | DIN EN 61000-6-4 | closed tanks |
|
| Shock resistance |
| DIN EN 60068-2-27 | 50 g (11 ms) |
|
| Vibration resistance |
| DIN EN 60068-2-6 | 8 g (10...2000 Hz) |
|
| MTTF |
223 |
| Weight |
362 |
| Dimensions |
Ø 30 / L = 355 |
| Material |
stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK; PEI; FKM |
| Materials (wetted parts) |
stainless steel (1.4404 / 316L); stainless steel (1.4571/316Ti ); PEEK surface characteristics: Ra < 0,8 µm / Rz = 4 µm; FKM |
| Process connection |
threaded connection G 1/2 sealing cone |
| Display |
| Switching status | LED, yellow | | operating status | LED, green |
|
| Pack quantity |
1 pcs. |
| Connection |
Connector: 1 x M12; coding: A; Contacts: gold-plated |
