| Application |
|
| Design |
housing for DIN rail mounting, Only for operation with AS-i masters with the profile M4 |
| Application |
field installation |
| Electrical data |
|
| Operating voltage |
26.5...31.6 DC; (cULus - Class 2 source required) |
| Max. current consumption from AS-i |
250 |
| Max. current load total |
2 |
| Integrated watchdog |
yes |
| Inputs / outputs |
|
| Number of inputs and outputs |
Number of digital inputs: 4; Number of digital outputs: 4 |
| Inputs |
|
| Number of digital inputs |
4 |
| Input circuit of digital inputs |
PNP |
| Sensor supply of the inputs |
AS-i |
| Voltage supply |
18...30; (via flat cable) |
| Max. total current rating of inputs |
200 |
| Input current High |
6...10 |
| Input current low |
0...2 |
| Switching level high |
> 11 |
| Digital inputs protected against short circuits |
yes |
| Outputs |
|
| Number of digital outputs |
4 |
| Circuit |
PNP |
| Voltage range DC |
15...30; (to PELV; via flat cable) |
| Max. current load per output |
1000; (utilization category DC-13 (control of electromagnets): 20 W (IEC 60947-5-1)) |
| Short-circuit proof |
yes |
| Electrically separated |
yes |
| Actuator supply outputs |
AUX |
| Operating conditions |
|
| Ambient temperature |
-25...70 |
| Protection |
IP 67 |
| Tests / approvals |
|
| EMC |
<table><tr><td>EN 50295</td><td></td></tr><tr><td>IEC 61000-6-2</td><td></td></tr></table> |
| MTTF |
155 |
| AS-i classification |
|
| AS-i version |
3.0 |
| AS-i addressing |
Addressing socket |
| Extended addressing mode |
yes |
| AS-i master profile |
M4 |
| AS-i profile |
S-7.A.7 |
| AS-i I/O configuration |
7 |
| AS-i ID code |
A.7 |
| Data bits |
<table><tr><td>Data bit</td><td>D0</td><td>D1</td><td>D2</td><td>D3</td></tr><tr><td>Input</td><td>1</td><td>2</td><td>3</td><td>4</td></tr><tr><td>Socket</td><td>I-1</td><td>I-2</td><td>I-3</td><td>I-4</td></tr><tr><td>Pin</td><td>4</td><td>4</td><td>4</ |
| Mechanical data |
|
| Weight |
291.5 |
| Housing |
rectangular |
| Type of mounting |
quick mounting; AS-i flat cable connection; Mounting on DIN rail; (TH35 (EN 60715)) |
| Dimensions |
103 x 90 x 44.2 |
| Material |
PA; Piercing contacts: CuSn6 nickel-plated and tin-plated |
| Displays / operating elements |
|
| Display |
<table><tr><td>Power</td><td>LED, green</td></tr><tr><td>errors</td><td>LED, red</td></tr><tr><td>Function</td><td>LED, yellow</td></tr></table> |
| Electrical connection |
|
| Accessories |
|
| Items supplied |
<table><tr><td>lower part</td></tr></table> |
| Accessories (optional) |
<table><tr><td>Protective cap: M12, E73004</td></tr></table> |
| Remarks |
|
| Remarks |
<table><tr><td> Inputs and outputs must be electrically isolated.</td></tr><tr><td> Do not connect any of the following points to an external potential:</td></tr><tr><td> I-, I+, I1, I2, I3, I4</td></tr><tr><td> The connections are electrically connected |
| Pack quantity |
1 pcs. |
| Electrical connection - Inputs |
|
| Electrical connection - Outputs |
|
| Connection |
Connector: M12 |
