| Design |
housing for DIN rail mounting |
| Application |
AS-i ATEX module |
| Operating voltage |
26.5...31.6 DC |
| Max. current consumption from AS-i |
250 |
| Number of inputs and outputs |
Number of digital inputs: 4 |
| Number of digital inputs |
4 |
| Input circuit of digital inputs |
PNP |
| Sensor supply of the inputs |
AS-i |
| Voltage supply |
18...30; (via flat cable) |
| Max. total current rating of inputs |
200 |
| Input current High |
6...10 |
| Input current low |
0...2 |
| Switching level high |
> 11 |
| Digital inputs protected against short circuits |
yes |
| Ambient temperature |
-10...50 |
| Protection |
IP 50 |
| ATEX marking |
II 3D Ex tc IIIB T80°C Dc X IP50 |
| EMC |
|
| MTTF |
404 |
| AS-i version |
2.11; 3.0 |
| AS-i addressing |
Addressing socket |
| Extended addressing mode |
no |
| AS-i master profile |
M2; M3; M4 |
| AS-i profile |
S-0.0.E |
| AS-i I/O configuration |
0 |
| AS-i ID code |
0.E |
| AS-i certificate pending |
yes |
| Data bits |
| Data bit | D0 | D1 | D2 | D3 | | Input | 1 | 2 | 3 | 4 | | Socket | I-1 | I-2 | I-3 | I-4 | | Pin | 2+4 | 2+4 | 2+4 | 2+4 |
|
| Weight |
227.5 |
| Housing |
rectangular |
| Type of mounting |
AS-i flat cable connection; Mounting on DIN rail; (TH35 (EN 60715)) |
| Dimensions |
103 x 45 x 44.7 |
| Material |
PA; Piercing contacts: CuSn6 nickel-plated and tin-plated |
| Display |
| Power | LED, green | | errors | LED, red | | Function | LED, yellow |
|
|
Connector: 4 x M12; coding: A |
| Items supplied |
|
| Accessories (optional) |
| Protective cap: M12, E73004 | | impact protection housing:, E7000A |
|
| Remarks |
| Mechanical protection has to be implemented. | | Otherwise the unit must be installed together with the impact protection housing (E7000A). | | Do not connect any of the following points to an external potential: | | I-, I+, I1, I2, I3, I4 | | The connections are electrically connected with the AS-i cable. |
|
| Pack quantity |
1 pcs. |
