| Application |
field installation; for use in wet environments |
| Operating voltage |
26.5...31.6 DC |
| Max. current consumption from AS-i |
170 |
| Integrated watchdog |
yes |
| Number of inputs and outputs |
Number of digital inputs: 4; Number of pneumatic outputs: 2 |
| Number of digital inputs |
4; (2 x 2) |
| Input circuit of digital inputs |
PNP |
| Sensor supply of the inputs |
AS-i |
| Voltage supply |
20...30 |
| Max. total current rating of inputs |
100 |
| Input current High |
> 3 |
| Input current low |
< 1.5 |
| Switching level high |
> 10 |
| Digital inputs protected against short circuits |
yes |
| Number of pneumatic outputs |
2 |
| Actuator supply outputs |
AS-i |
| Ambient temperature |
0...55 |
| Note on ambient temperature |
| with special compressed air treatment: < 0 °C | | the derating of the current load indicated in the operating instructions is to be taken into account at the following ambient temperature: > 50 °C |
|
| Storage temperature |
-20...80 |
| Max. relative air humidity |
90; (non condensing) |
| Max. height above sea level |
2000 |
| Protection |
IP 67 |
| Degree of soiling |
2 |
| EMC |
| EN 62026-2 | | | EN IEC 61000-6-2 | | | EN IEC 61000-6-4 | | | EN IEC 61326-1 | |
|
| Extended addressing mode |
no |
| AS-i master profile |
M2; M3; M4 |
| AS-i profile |
S-7.F.F |
| AS-i I/O configuration |
7 |
| AS-i ID code |
F.F |
| Data bits |
| Data bit | D0 | D1 | D2 | D3 | | Inputs / outputs | I-1 | I-2 | I-3/ O-3 | I-4 / O-4 | | Pin | 4 | 2 | 4 | 2 |
|
| Weight |
263.5 |
| Housing |
rectangular |
| Type of mounting |
AS-i interface to FC and SC lower parts |
| Dimensions |
107 x 45 x 47 |
| Material |
housing: PBT; metal parts: stainless steel (1.4305 / 303); sealing: FKM |
| Pneumatic system |
2 x 3/2-way seat valves |
| Operating pressure range |
2...8 |
| Note on working pressure range |
| incl. possible pressure peaks |
|
| Air flow at 6/5 bar |
350 |
| Air flow at 6/0 bar |
550 |
| Permissible compressed air |
filtered (5 µm); lubricated (ISO-VG10) or not lubricated |
| Tube fittings |
Legris LF 3000/8 |
| Exhaust |
exhaust can be discharged through tube connection |
| Display |
| Power | LED, green (AS-i) | | Switching status | LED, yellow (I1...I4, O3...O4) |
|
| Module connection |
Flat cable |
| Accessories (optional) |
|
| Remarks |
| Please see the notes on compressed air and EMC/ESD under "Downloads" |
|
| Pack quantity |
1 pcs. |
|
Connector: M12; coding: A |
|
Connector: M12; coding: A |
