| Type of light |
Infrared light |
| Image resolution 3D |
352 x 264 |
| Angle of aperture 3D |
60 x 45; (nominal value without lens distortion correction) |
| Max. reading rate |
25 |
| Housing |
rectangular |
| Application |
Camera for the output of 3D image data |
| Operating voltage tolerance |
-15...20 |
| Operating voltage |
24 DC; (EN 61131-2) |
| Current consumption |
350; (typical) |
| Max. current consumption |
830; (mean value at 24 VDC ; with switched outputs ; <1600 peak current pulsed) |
| Protection class |
III |
| Overvoltage category |
II |
| Type of light |
Infrared light |
| Image sensor |
PMD 3D ToF-Chip |
| Integrated lighting |
yes; (infrared: 850 nm) |
| Number of inputs and outputs |
Number of digital inputs: 1; Number of digital outputs: 2 |
| Trigger |
24 V PNP/NPN (IEC 61131-2 Typ 3) |
| Number of digital inputs |
1; (including trigger input) |
| Input circuit of digital inputs |
24 V PNP/NPN; (configurable; IEC 61131-2 Typ 3) |
| Total number of outputs |
2 |
| Electrical design |
24 V PNP/NPN; (EN 61131-2) |
| Number of digital outputs |
2; (configurable) |
| Max. voltage drop switching output DC |
1 |
| Max. current load per output |
100 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
yes (non-latching) |
| Overload protection |
yes |
| Operating distance |
300...8000 |
| Note on operating distance |
| object size: 200 x 200 mm | | reflectivity: 18 % |
|
| Image resolution 3D |
352 x 264 |
| Angle of aperture 3D |
60 x 45; (nominal value without lens distortion correction) |
| Max. reading rate |
25 |
| Measuring range |
< 30 |
| Parameter setting options |
via PC with ifm Vision Assistant or XML-RPC; software API for C, C++ and Halcon |
| Communication interface |
Ethernet |
| Number of Ethernet interfaces |
1 |
| Transmission standard |
10Base-T; 100Base-TX |
| Transmission rate |
10 MBit/s; 100 MBit/s |
| Protocol |
TCP/IP |
| Factory settings |
| IP address: 192.168.0.69 | | subnet mask: 255.255.255.0 | | gateway IP address: 192.168.0.201 |
|
| Usage type |
Parameter setting; Data transmission |
| Ambient temperature |
-10...50 |
| Storage temperature |
-40...85 |
| Max. relative air humidity |
90; (non condensing) |
| Max. height above sea level |
4000 |
| Protection |
IP 65; IP 67 |
| Degree of soiling |
3 |
| Max. immunity to extraneous light |
8; (with reduced measuring accuracy and repeatability: < 100) |
| EMC |
| DIN EN IEC 61000-6-4 | radiation of interference / industrial environments | | DIN EN IEC 61000-6-2 | noise immunity / industrial environments |
|
| Shock resistance |
| DIN EN 60068-2-27 | 50 g / (11 ms) not repetitive | | DIN EN 60068-2-27 | 40 g / (6 ms) repetitive |
|
| Vibration resistance |
| DIN EN 60068-2-6 | 2 g / (10...150 Hz) | | DIN EN 60068-2-64 | 2.3 g RMS / (10...500 Hz) |
|
| Laser protection class |
1 |
| Notes on laser protection |
| Caution invisible laser radiation | | EN 60825-1:2014 +A11:2021 | | IEC 60825-1:2014 | | Complies with 21 CFR 1040.10 except for conformance with IEC 60825-1 Ed. 3, as described in Laser Notice No. 56, dated May 8, 2019. |
|
| Electrical safety |
| DIN EN IEC 61010-2-201 | electrical supply only via PELV circuits |
|
| MTTF |
37 |
| Weight |
766.95 |
| Housing |
rectangular |
| Dimensions |
72 x 65 x 82.6 |
| Material |
housing: diecast aluminium; front lens: gorilla glass; Function display: PA |
| Tightening torque |
< 0.8 |
| Display |
| Function | 2 x LED, green Ethernet Power | | Switching status | 2 x LED, yellow OUT 1 OUT 2 |
|
| Items supplied |
| Protective covers | | spring washers |
|
| Remarks |
| Repeatability and accuracy depend on the image settings and the environmental conditions. | | The data sheet values apply to typical settings and conditions. |
|
| Pack quantity |
1 pcs. |
|
Connector: 1 x M12; coding: D |
|
Connector: 1 x M12; coding: A |
