SKU: 8172719

GTIN: 4052568646202

Все характеристики

Technical Data
Design	Electrical connection at the sideRocker valve with diaphragm seal
Sealing principle	Soft
Material in contact with the medium	PEEK
Suitable for use with food	See supplementary material information
Valve function	2/2-way, closed, monostable
Nominal size	2
Flow direction	Reversible
Type of actuation	Electric
Type of piloting	Direct
Type of reset	Mechanical spring
Manual override	None
Mounting position	optional
Type of mounting	With through-hole for M2.5 screw
Electrical connection 1, connection type	Cable with plug
Electrical connection 1, connector system	Connection pattern H
Electrical connection 1, connection pattern	00995622
Size	16
Grid dimension	17
Fluid connection	Flange
Medium	Liquid mediaGaseous media
Note on the medium	Observe resistance of materials that come into contact with the mediaMaximum particle size 5 µm
Internal volume	110 µl valve with fl. conn.89 µl fluid chamber valve
Media temperature	050
Media temperature for fluids	050
Ambient temperature	050
Storage temperature	-2070
Medium pressure	-10.87529
Burst pressure	290
Total leakage	0.004
Operational voltage range DC	1224
Permissible voltage fluctuations	+/- 10 %
Information on power consumption	Low-current phase 1.4 W, high-current phase 5.5 W for 100 ms
Characteristic coil data	12 - 24 V DC: low-current phase 1.4 W, high-current phase 5.5 W
Insulation material class	B
Duty cycle	100% in conjunction with holding current reductionObserve the notes on operating the solenoid valves.
Max. switching frequency	4
Note on switching frequency	Dependent on the ambient temperature and installation state
Switch-on time for fluids	16
Switching time on gaseous media	12
Standard nominal flow rate (standardised to DIN 1343)	65
Note on standard nominal flow rate	In case of a pressure drop of 1 -> 0 bar (gaseous media)
Flow rate Kv	0.8
Note on flow rate Kv	For medium waterPressure difference 1 bar
Water flow rate at max. operating pressure	0.07 m³/h1.2 l/min
Symbol	00992884
Material housing	PEEK
Material membrane	EPDM
Material seals	EPDM
Note on materials	RoHS-compliant
LABS (PWIS) conformity	VDMA24364 zone III
Product weight	50
Degree of protection	IP40
Note on degree of protection	In assembled state
Instructions on use	For indoor use only
Corrosion resistance class CRC	0 - No corrosion stress
Approval	RCM trademark
CE mark (see declaration of conformity)	To EU EMC DirectiveIn accordance with EU RoHS Directive
UKCA marking (see declaration of conformity)	To UK instructions for EMCTo UK RoHS instructions